Intelligent design of the generator are among the world’s leading technology, which possesses the following functions:

      1.Water-cooling.

2.Both air and oxygen source accpetable.

3.Standard 4~20mA signal access port,allowing remote control by different types of ozone measureing devices.

4.Key points monitoring including main board temperature detection,line output transformer temperature detection,cooling water temperature detection,back flow water  detection of the corona discharge tube.

5.Stepless adjustable ozone output.

6.Circuit components from Siemens(IGBT).

7.PLC standard.

On the gas flow control: When using the oxygen source, the gas flow is 10-35 / min; when using the air source, it can be regulated accordingly; please try to turn gas flow down as possible when the ozone density satisfies the demand,( to turn the oxygen flow down can lengthen the service life of the oxygen generator). 

Upon a small gas flow control, it can also adjust Ozone volume controls to increase or decrease amount of ozone.

It may open a set, two or more sets accordingly, but generally one set will be remained as the spare, the flowmeter of the set which is not open must be turned off.