The ozone device comprises two parts: ozone source and gas-water mixing device. The ozone generator should provide sufficient concentration and output of ozone, mixing device to dissolve ozone in water with high efficiency, that is, to achieve a certain degree of ozone solubility methods? Let the technician introduce it to you.

1, traditional aeration method – a long history of traditional mixing method. (Gas plate method, bubble tower method) operation mode – gas and water flow, countercurrent or multi-level series overlapping inverse flow, continuous operation or intermittent batch operation. Advantages: Low energy consumption. Disadvantages: uneven gas distribution when the nozzle is blocked, poor mixing, requiring large air compressors and expensive oxidation towers.
2, the famous Venturi jet mixing method – a safe and efficient mixing method. Operation mode — air and water forced mixing. Advantages: less investment, good mixing, short contact time, ozone concentration in water after jet mixer can be several times that of aeration method.
3, gas-liquid strong mixing chamber – a safe, energy-saving and highly efficient mixing method, is an upgraded product operation mode improved on the basis of Venturi jet mixer – make full use of water turbulence to produce large negative pressure, inhale ozone, produce vortex, rotate and collide with each other in the mixing chamber. The actual application proves that the absorption rate of primary ozone is more than 90%, and the solubility of ozone in water is about twice that of Venturi jet mixer under the same ozone generation system. The outer body of the gas-liquid strong mixing chamber is made of 304 stainless steel, the inner chamber is made of 316 stainless steel and some ozone resistant ABS materials, SSLW series of inner chamber is made of stainless steel and ozone resistant PVDF material, the product is durable, no mechanical failure and maintenance free, easy to operate and install, for the current minimum investment, the mixing effect of equipment processing large water needs to be customized. The size of the table below is subject to change.
4, gas-liquid mixing pump – safe and highly efficient mixing method: gas-liquid mixing pump inlet can use negative pressure suction gas, high-speed rotating pump impeller will be liquid and ozone generator gas mixing, due to the pressure mixing in the pump, gas and liquid fully dissolved, high dissolution efficiency. A single gas-liquid mixing pump attracts, mixes, dissolves and delivers the highly dissolved liquid directly to the point of use.