Using an ozone generator to treat drinking water is an effective disinfection and purification process, the following are the treatment steps and some precautions:
Processing steps:
1. Connect the equipment: Ensure that the ozone generator is installed correctly, and connect the necessary pipes and power supplies according to the equipment instructions.

2. Ozone generation: Turn on the ozone generator and produce ozone by ionizing air or using pure oxygen.
3. Ozone injection: Ozone gas is injected into * by an injection device such as an aerator, a venturi * injector or a mixing pump. Ensure that ozone is evenly distributed throughout the water body.
4. Maintain contact time: The time of contact between ozone and water should be enough, which is usually determined by water quality and ozone concentration. During this time, ozone destroys bacteria, viruses and other microorganisms in the water, while breaking down organic pollutants and odors.
5. Decomposition reaction: During the contact process, ozone will gradually decompose into oxygen, and harmful substances in the water will be oxidized into harmless substances.
6. Discharge or activated carbon filtration: The treated water usually needs to be filtered through activated carbon to remove residual ozone and possible organic by-products to ensure the safety of water quality.
7. Water quality testing: After treatment, water quality should be tested to ensure that drinking water standards are met.
Note:
● Ozone concentration control: The concentration of ozone must be controlled to avoid excessive concentration of other beneficial substances in the water to cause damage or produce harmful by-products.
● Contact time: Ensure adequate ozone contact time to ensure adequate disinfection.
● Equipment selection: Select the right type of ozone generator according to the amount of water that needs to be treated.
● Safe use: When operating the ozone generator, follow the operating instructions, pay attention to safety, and avoid ozone leakage into the operating environment.
● Follow-up treatment: After ozone treatment, if there is residual ozone in the water, it needs to be properly treated (such as using activated carbon) before it can be drunk. 
 The use of ozone generators to treat drinking water is a professional technical process that needs to follow the relevant safety specifications and technical guidelines to ensure that the treated water is safe to drink.